Our First Commit! Hello There !

2026-03-03 10:26:27 +01:00
commit 89dc1b755c
@@ -0,0 +1,4 @@
+M17 Y
+M42 P3 S1
+G4 P1000
+M42 P3 S0.6
@@ -0,0 +1 @@
+M42 P3 S0
@@ -0,0 +1,24 @@
+var x = 3 ; Numero di cicli totali
+var n = 2 ; Numero di ripetizioni gcode dimostrativo
+
+; Contatore
+var j = 1 
+var i = 1 
+
+while var.j<var.x
+	G28
+	; Contatore
+	set var.i = 1 
+	
+	while var.i < var.n
+        G4 P50                            ; Pausa di 50ms
+		M98 P"0:/gcodes/A1.gcode"
+        set var.i = var.i + 1             ; Usa 'set' per modificare una variabile esistente
+	
+	M18
+	G4 S300                            ; Pausa di 5 min
+	set var.j = var.j + 1           ; incremento il ciclo esterno
+
+
+    
+; echo "Ciclo terminato. Valore finale di i: " ^ var.if
@@ -0,0 +1,6 @@
+;M280: Set servo position
+;Parameters
+;Pnnn Servo index
+;Snnn Angle (see notes) or microseconds
+
+M280 P7 S10 
@@ -0,0 +1,6 @@
+;M280: Set servo position
+;Parameters
+;Pnnn Servo index
+;Snnn Angle (see notes) or microseconds
+
+M280 P7 S170 
@@ -0,0 +1,2 @@
+M17
+M42 P4 S1 ; Accende il LED collegato a OUT8
@@ -0,0 +1,11 @@
+;M150
+;Rnnn Red component, 0-255
+;Unnn Green component, 0-255
+;Bnnn Blue component, 0-255
+;Wnnn White component, 0-255 (Only for RGBW NeoPixel)
+;Pnnn Brightness, 0-255
+;Ynn Brightness, 0-31 (alternative to P 0-255)
+;Snnn Number of individual LEDs to set to these colours, default 1
+;Fn Following command action. F0 (default) means this is the last command for the LED strip, so the next M150 command starts at the beginning of the strip. F1 means ;further M150 commands for the remainder of the strip follow this one.
+;En LED strip number, default 0. See M950 for defining the LED strip number, pin and LED type.
+M150 E0 r0 u0 b0 P128 S20 F0 
@@ -0,0 +1,11 @@
+;M150
+;Rnnn Red component, 0-255
+;Unnn Green component, 0-255
+;Bnnn Blue component, 0-255
+;Wnnn White component, 0-255 (Only for RGBW NeoPixel)
+;Pnnn Brightness, 0-255
+;Ynn Brightness, 0-31 (alternative to P 0-255)
+;Snnn Number of individual LEDs to set to these colours, default 1
+;Fn Following command action. F0 (default) means this is the last command for the LED strip, so the next M150 command starts at the beginning of the strip. F1 means ;further M150 commands for the remainder of the strip follow this one.
+;En LED strip number, default 0. See M950 for defining the LED strip number, pin and LED type.
+M150 E0 r100 u10 P255 S18 F0 
@@ -0,0 +1,13 @@
+;M150
+;Rnnn Red component, 0-255
+;Unnn Green component, 0-255
+;Bnnn Blue component, 0-255
+;Wnnn White component, 0-255 (Only for RGBW NeoPixel)
+;Pnnn Brightness, 0-255
+;Ynn Brightness, 0-31 (alternative to P 0-255)
+;Snnn Number of individual LEDs to set to these colours, default 1
+;Fn Following command action. F0 (default) means this is the last command for the LED strip, so the next M150 command starts at the beginning of the strip. F1 means ;further M150 commands for the remainder of the strip follow this one.
+;En LED strip number, default 0. See M950 for defining the LED strip number, pin and LED type.
+;M150 E0 r100 u10 P128 S10 F0 
+M150 E0 r255 P255 S9 F1 
+M150 E0 u255 P255 S9 F0